Life Fitness Lifecycle LC9500 Service Manual page 90

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Replace the Intermediate Pulley Shaft and Bearings - Continued
Special Service Tools: Bearing Service Tool Kit – Part Number: BearingToolKit
6. Turn the forcing screw clockwise to press out the pulley shaft assembly from the bearings and spacer.
7. Once the pulley shaft is free of the
bearings, proceed to remove the
bearings.
Note: Do Not replace the pulley without
replacing the bearings.
8. Install the bearing puller to the frame as illustrated.
Intermediate
Pulley/Shaft
Assembly
Bearings
Forcing
Screw
PUSHING OUT THE PULLEY SHAFT
Threaded
Rod
Spacer
Bearings
12
Hex Nut
Thrust
Washer
SETTING UP INTERMEDIATE
BEARING PULLER
Spacer
Use Standard
2-Jaw Puller
OTC Model 1025
Bearing
Spacer
Hub