Alternator Belt - Life Fitness Lifecycle LC9500 Service Manual

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Remove the Alternator
Special Service Tools: Belt Tensioning Gauge
Alternator
Alternator
Mounting
Bolt/Washer
1. Remove the pedals, crank arms, and side shrouds. See "How To..." in this section.
2. Remove alternator wiring from alternator. Note the location of each wire.
3. Remove the alternator tensioning bolt.
4. Loosen the alternator mounting bolt, and then pivot the alternator enough to slacken the alternator belt, then
remove the alternator belt.
5. Remove the alternator mounting bolt, washers, and lock nut, and lift the alternator off the frame.
6. Install new alternator in reverse order.
7. Position new alternator belt on the far left groove of the alternator pulley (user's side) and not in the center of
the pulley. Tighten the alternator belt 70-80 lbs.
Alternator
Wiring
Alternator
Washer/
Lock Nut
Alternator
Tensioning Bolt,
Lock Washer,
Flat Washer
18
Alternator
Belt