Life Fitness Lifecycle LC9500 Service Manual page 81

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Remove Pedals, Crank Arms, and Shrouds
Special Service Tools: NONE
NOTE: Each shroud can be removed independently
of each other. This procedure covers removal of the
right shroud first and then the left shroud. However,
the order is not critical, but what is important, is to
know that three screws secure the shrouds to the
frame while the remaining five screws secures the
shroud halves to each other. See illustration below.
1. Remove the mounting screw on the right side
seat cover and then remove the seat post
covers.
2. Remove three screws from the right
crank arm, and then remove the right
crank arm from the crank hub with
pedal attached.
3. To remove the right shroud, remove
eight screws as follows:
•
Four screws at the bottom of the
shroud
•
One at the top rear of the shroud which
are secured into the left shroud
•
Three screws, as shown, which secure
the right shroud to the frame.
4. After removing these screws, remove
the right shroud from the unit. The left
shroud will remain attached to the left
side of the frame.
Seat Post Covers
Seat Post
Cover
Screw
Crank Hub
Screws(3)
(15-20 ft lbs)
Shroud-to-Shroud
Screws (5)
(12-15 in lbs)
3
Shroud to
Frame Screw (3)
(12-15 in lbs)