Mechanism Adjustment - Epson Stylus PRO 7500 Service Manual

EPSON Stylus Pro 7500

5.2.6 Mechanism Adjustment

This section describes the mechanism adjustments you need to perform when replacing or
removing certain parts. The parts and their corresponding adjustments are as follows.
Table 5-19. Necessary Mechanism Adjustments
Parts Adjustment
CR Motor CR Steel Belt Tension
PF Motor PF Belt Tension
Self-diagnostic test -
P THICK sensor
"Paper Thickness"
Cover Open Self diagnostic test -
sensor "Cover"
CR Encoder CR encoder installation
Sensor position adjustment.
CR encoder scale
CR Encoder
installation position
Scale
adjustment
Cutter positioning
Cutter Solenoid
adjustment
PF ENC installation
position adjustment
PF Encoder
Sensor
PF ENC installation
position adjustment 2
Adjustment
Necessary Tools Refer to
Tension Gauge #F712
code: 1047744
page 220
Standard: 8,000g
Tension Gauge
code: B747700300
page 221
Standard: 4,000g
6/7mm schema gauge(s) page 222
----
page 223
Exclusive tool #F757
page 224
Code: 1059436
Exclusive tool #F758
page 225
Code: 1059440
Exclusive tool #F763
page 226
Code: 1060656
Exclusive tool #F764
Code: 1060658
page 230
Exclusive tool #F765
Code: 1060657
Adjustment Steps
Revision A
219