Epson Stylus PRO 7500 Service Manual page 117

EPSON Stylus Pro 7500
4.2.3.2 Removing the Suction Fans (Left / Right)
1. Remove Paper Guide L2 as described in "Paper Guide L2 Removal" on page 107.
2. Remove the Waste Ink Box from the printer as described in steps 1 to 3 only of
"Replacing the Waste Ink Pads" on page 115.
3. Remove the two screws (CP(W):M4x8) and one screw (CP(W):M4x40) securing the
fan duct, and then remove the fan duct.
4. Disconnect the fan connector and harness.
5. Remove the one screw (CP(W):M4x8) securing the fan, and remove the fan.
suction fan
screws(CP(W):M4x40)
screws
(CP(W):
M4x8)
Figure 4-35. Suction Fan Removal
Disassembly & Assembly
fanduct
screws
(CP(W):
M4x8)
connecter
Disassembly Flow
Revision A
117