Epson Stylus PRO 7500 Service Manual page 104

EPSON Stylus Pro 7500
6. Return the Paper Set Lever to the set position, and pull off the R Side Cover to the
right.
Figure 4-9. R Side Cover Removal 4/4
Disassembly & Assembly
4.2.1.3 L Side Cover Removal
1. Open the roll paper cover.
2. From the middle, remove one black screw (CBP: M4 x 10), from the back side,
remove 1 white screw (CUPS: M4 x 8), then from the left outside, remove 2 white
R-side cover
screws (CUPS: M4 x 8) and remove the L side cover.
paper set lever
screws(CBP:M4x10)
screws
(CUPS:M4x8)
3. Pull off the L Side Cover to the left.
Disassembly Flow
.
Figure 4-10. L Side Cover Removal 1/2
Figure 4-11. L Side Cover Removal 2/2
Revision A
roll parer cover
L-side cover
104