EPSON Stylus Pro 7500
4.2.1.1 Panel Unit Removal
1.
Release the clips on both sides of the control panel unit and pull slightly away from the
R Side Cover.
clip
Figure 4-4. Panel Unit Removal 1/2
2.
Remove the FFC cable from the connector and hook.
panel unit
Figure 4-5. Panel Unit Removal 2/2
Disassembly & Assembly
panel unit
clip
connector
hook
FFC
When replacing the control panel and FFC, make sure you push the
FFC cable slack inside and towards the rear of the printer to avoid
interfering with carriage movement.
Disassembly Flow
Revision A
102