EPSON Stylus Pro 7500
4.2.3.12 Removing the CR_HP Sensor
1.
Remove the R Side Cover as described in "R Side Cover Removal" on page 103.
2.
Push the carriage lock using your finger to unlock the carriage and move the carriage
from the home position to the left.
3.
Disconnect the harness from the CR_HP Sensor connector.
4.
Release the hook fixing the CR_HP Sensor and remove the CR_HP Sensor.
hook
Figure 4-86. Removing the CR_HP Sensor
Disassembly & Assembly
conecter
CR_HP sensor
Disassembly Flow
Revision A
140