EPSON Stylus Pro 7500
6.
Perform steps 1 and 2 of the "Replacing the Waste Ink Pads" on page 115.
7.
Remove the four (CUPS M4x6) screws securing the Maintenance Base Assembly to
the printer main body and remove the Maintenance Base Assembly.
screw(4x6)
Figure 4-73. Removing the Maintenance Base Assembly - 1
screw(4x6)
Figure 4-74. Removing the Maintenance Base Assembly - 2
Disassembly & Assembly
maintenance base
(assembly)
(+)driver
Figure 4-75. Removing the Maintenance Base Assembly - 3
8.
Shift the Maintenance Base Assembly to the left to release the joint with the R Side
Frame. Then, watching out for the harnesses, lower the Maintenance Base Assembly
and remove it.
flushing box assembly
(+)driver
Disassembly Flow
pump moter
assembly
cleaner head
pump assembly
Figure 4-76. Maintenance Base Assembly
Revision A
screw(4x6)
cap assembly
134