Dc Power Cable Assembly - HP ProLiant XL270d Gen9 Maintenance And Service Manual

4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
6. Remove the access panel.
7. Remove the management riser assembly:
a. Loosen the captive screw.
b. Slide the management riser assembly towards the front and remove it from the server.
To replace the component, reverse the removal procedure.

DC power cable assembly

To remove the component:
Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server front panel.
4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
6. Remove the access panel.
7. Remove the DC power cable assembly:
a. Loosen the captive screws.
DC power cable assembly 57