Head Up / Down - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF
1
Page Size 20mm
Enter
Life Count : -1
Enter
Wait Time(Sec).0
Enter
Count : 10
Enter
End : 50
Figure 5-101.
o
The maximum value of the page size is [3000mm].
o
The maximum value of the reliability number designation is [99,999,999 times].
o
The maximum value of the wait time is [999 seconds].
o
There is the wait time that is designated whenever the cutter reliability test ends 1
time.
Adjustment
Adjustable with "Paper Feed +/-" key
at unit of 1%
Adjustable with "Paper Feed +/-" key
at unit of 1%
Adjustable with "Paper Feed +/-" key
at unit of 1%

5.3.8.5 Head Up / Down

Perform the head up / down reliability test.
Perform the capping designated number.
When the reliability number is [-1], reliability is repeated until [Pause] key is input.
When the reliability number is [-1], the biggest count number is 99,999,999 times (within 8
column), and the count become 0 in the case that this is exceeded.
Moving the carriage and combine the meshing of the gear.
Following figure showing the head up / down reliability test menu sequence.
Life Count : -1
Enter
Wait Time (Sec).0
Enter
Count : 10
Enter
End : 50
o
The maximum value of the reliability number designation is [99,999,999 times].
o
The maximum value of the wait time is [999 seconds].
o
There is the wait time that is designated whenever the head up / down reliability
test ends 1 time.
Self-Diagnostics
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Figure 5-102.
Revision B
270