Reliability; Environmental Conditions; Temperature/Humidity - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

1.2.9 Reliability

Total print volume : 20,000 pages (B0, 720x360 FOL,Bi-D)
Print head life : 28 billion shot / nozzle
Cutter life : Approx. 2,000 sheets (B0+)
Approx. 1,000 sheets (B0+) for film
Maintenance parts : Ink pad / Maintenance unit/Auto print head optimization system
(exchange 3 times within printer life)
Steel belt / FFC / Tube/Head unit/CR motor
(exchange per 4,800,000 pass)
RTC backup battery
(about 8 years)
Product Description

1.2.10 Environmental Conditions

1.2.10.1 Temperature/Humidity

See the following table.
Table 1-9. Environmental Conditions
Condition Temperature
Operating
(50~95°F)
-20~40°C
Storage
(-4~104°F)
-20~60°C
Transportation
(-4~140°F)
Notes:
1) When storing the printer, make sure the printheads are in the home (capped) position. If
necessary switch power on, wait for the printheads to move to the home position, and then
switch power off.
2) Before transporting the printer, remove the ink cartridges and turn the ink valves screws to
the closed position. Also make sure the printheads are in the home, capped, position. After
transporting the printer, install new ink cartridges.
3) If the temperature drops below -15°C (5°F), the ink in the cartridges and printheads
freezes. The ink thaws completely after three hours at 25°C (77°F).
Humidity (%)
Figure 1-3. Print Temperature and Humidity
Specifications
Humidity
• Less than a month at 40°C
10~35°C
20~80%
(104°F)
• Less than 120 hours at 60°C
20~85%
(140°F)
• With no freezing
5-85%
90
80
70
60
50
40
30
20
10
15
10 20 27 30
Temperature (°C)
Revision B
Notes
35 40
25