Total Reliability - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

5.3.8.11 Total reliability

Perform the CR axis (motor, bearing, tube etc.), the PF axis, the CR axis + the PF axis, the
head up / down motor, the head lock, and the cutter solenoid simultaneous reliability test.
When the reliability number is [-1], reliability is repeated until [Pause] key is input.
When the reliability number is [-1], the biggest count number is 99,999,999 times (within 8
column), and the count become 0 in the case that this is exceeded.
Adjustment
Following figure showing the total reliability test menu sequence.
Speed CCW :240CPS
Enter
Speed CCW :240CPS
Enter
Feed Amount : 3.0mm
Enter
CR+PF Motor : 100
Enter
Life Count : -1
Enter
Count CR PF : 10
Count CR PF : 50
End : 100
o
As for the parameter of CW, [240CPS], [300CPS], [400CPS], and [800CPS] are
possible select.
o
As for the parameter of CCW, [240CPS], [300CPS], [400CPS], and [800CPS] are
possible select.
Self-Diagnostics
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Figure 5-108.
Revision B
274