Voice Mail (Vm) Transfer Button - Panasonic KX-TD500 User Manual

2.2

Voice Mail (VM) Transfer Button

Allows you to assign a Flexible (CO, DSS) button as a VM Transfer button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS) button you
wish to assign as the VM
Transfer button.
<PT Display Example>
VTR-
<PT Display Example>
VTR-xxxx
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the Station
Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• You cannot enter non-existent extension or a floating directory number.*
Programming References
• System Programming — Installation Manual, Section 4
4.3.2 Group - Extension Group
4.5.9 Features - VPS Integration
* A Floating Directory Number (FDN) is a virtual extension number which appears to be an extension.
Refer to "Floating Station" in the Features Guide.
2-28
Station Programming
Station Programming
8
Enter the Voice Mail
Dial 8.
extension number
(3 or 4 digits).
CLR
(-xxxx:VM extension number)
CLR
— FDN
— Group Type:VM
—Voice Mail Command
(Assignment)
Voice Mail
extension no.
• The STORE indicator lights.
• The display shows the initial
AUTO DIAL
STORE
Press STORE.
programming mode.