Ringing Tone Selection For Co Buttons - Panasonic KX-TD500 User Manual

2.2 2.2

Ringing Tone Selection for CO Buttons

Allows you to assign a ringer frequency to each CO, PDN or SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
DPT
Press CO, PDN or SDN
which you wish to
change the ringing tone.
• The display shows the current
status.
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• The default is Ringing Tone Type 2.
• This feature applies to the following line access buttons:
S-CO, G-CO, L-CO, PDN, SDN
Station Programming Station Programming
Press the same CO,PDN
or SDN again
• The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.
<DPT Display Example>
Tone Type-X
• If you want to change the tone type, enter another tone type
number.
tone type no.
Enter the tone type number
(1 through 8).
• The STORE indicator lights.
• The display shows the initial
(-x:tone type number)
Station Programming
AUTO DIAL
STORE
Press STORE.
programming mode.
2-39