Panasonic KX-TD500 User Manual page 125

A
Entering account codes during or after a conversation
During a conversation or within 15 seconds after the other party hangs up;
7230 / 7235 / 7433 / 7436
S1
Press ACCNT (S3).
• You can keep talking
PT
(Account)
Press ACCOUNT
(flexible button).
• The corresponding indicator light
turns on.
• You can keep talking.
Conditions
Your Account Code Entry mode is set to one of the following three modes by System Programming.
In "Verified - All Calls" mode
• You must always enter a system-registered account code to make a CO call.
• If the account code you entered is not found in the System Account Code Table
(Refer to "Section 4.5.5 Features - Account Code" in the Installation Manual), you
hear a reorder tone.
• You cannot enter an account code during and after a call (after a CPC signal
detected).
In "Verified - Toll Restriction Override" mode
• You can override the Toll Restriction imposed on your extension by entering a
system-registered account code before making a CO call (Toll Restriction Override by
Account Code Entry).
• If the account code you entered is not found in the System Account Code Table
(Refer to "Section 4.5.5 Features - Account Code" in the Installation Manual), you
hear a reorder tone.
4-10
Station Features and Operation
4.3 Station Features and Operation
ACCNT
S3
S2
Enter account code
(10 digits max., 0···9).
account code
Enter account code
(10 digits max., 0···9).
account code
Dial #.
• You may dial 99 instead of "#".
Dial #.
• You may dial 99 instead of "#".
is
*
3