Panasonic KX-TD500 User Manual page 45

2.1 Station Programming Instructions
Confirming the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO,DSS,PF) button.
• The display shows the current status.
— To exit Station Programming mode: Press [PROGRAM].
— If you wish to change the data, follow the programming procedure explained in this
section.
Clearing the data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS, PF) button that
you wish to cancel the
assignment.
— To exit Station Programming mode: Press [PROGRAM].
— The lists on the following pages are the buttons and programming access numbers used for
Station Programming. Detailed operating instructions are explained on each page in this
section.
2-4
Station Programming
HOLD
Press HOLD (END).
• The display shows the initial programming mode.
AUTO DIAL
2
STORE
Dial 2. Press STORE.
• The STORE indicator lights.
• The display shows the initial programming mode.