Panasonic KX-TD500 User Manual page 398

5.1
With a Directed Station Selection (DSS) Console, you can make or transfer calls and
access system features with the touch of a button. The DSS Console must be connected
to the Panasonic KX-TD500 System and paired with a PT (Proprietary Telephone).
System Programming is required to designate the extension number of the paired PT.
With a paired telephone, you can carry out the following operations using the DSS
Console:
• Direct access to an extension (Direct Station Dialing)
• Quick access to an outside party (One-Touch Dialing)
• Quick access to a system feature (One-Touch Access for System Features)
• Easy transfer to an extension (Call Transfer)
The above functions are enabled simply by pressing buttons on the console which are
pre-programmed as function buttons through Station Programming.
Panasonic KX-T series DSS Consoles are categorized as follows:
KX-T7240/
KX-T7040
KX-T7440
KX-T7441
Conditions
• The DSS Console and the PT should be placed side by side on your desk.
• Up to 8 DSS Consoles can be connected to a PT.
• A single line telephone cannot be utilized in conjunction with the DSS Console.
• For System Programming, please refer to the Installation Manual of the KX-TD500
System.
Programming References
• System Programming — Installation Manual, Section 4
4.4.3 Line - DSS Console
5-2
DSS Console Features
Configuration
DSS Console (32-DSS buttons, 16-PF buttons)
DSS Console (66-DSS buttons)
DSS Console for Attendant (48-DSS buttons, ANSWER button,
RELEASE button)
— Paired Extension