Two-Way Transfer Button Assignment Via Station Programming; Voice Mail Transfer Button Assignment Via Station Programming - Panasonic KX-TVP200 Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
4.4.10 Two-Way Transfer Button Assignment via Station
Programming
For the Two-Way Transfer feature to work at an extension, the extension must have a TWT
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure
below to assign a TWT button on an extension. (This is a station level programme and should
be done at each individual telephone.)
PC programming is also available for KX-TD500 users (see 4.4.12 Button Assignment via
PC Programming).
1.
Enter PITS Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the desired FLEXIBLE (CO or DSS/BLF) button that you want to assign as the
TWT button.
3.
Dial [91].
Screen output: 2Way-Trans:
4.
Dial the Voice Mail extension number.
Screen output: 2Way-Trans: _ _ _
(_ _ _ = The extension number you entered).
5.
Press STORE.
6.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
Conditions:
4.4.11 Voice Mail Transfer Button Assignment via Station
Programming
This feature allows an extension user to transfer calls directly to a Voice Mailbox. This is
available with both DPT and Inband Integrations.
PC programming is also available for KX-TD500 users (see 4.4.12 Button Assignment via
PC Programming).
1.
Enter PITS Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the VTR
button.
100
This button must be a CO or DSS/BLF key to be
programmed as a TWT button. When all Voice Mail
ports are busy and this key is pressed, the user will hear
reorder tone.
Installation Manual