Phantom Button - Panasonic KX-TD500 User Manual

2.2

Phantom Button

Allows you to assign a Flexible (CO) button as a Phantom button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
(CO)
Press the desired Flexible
(CO) button you wish to
assign as a Phantom button.
<PT Display Example>
Phantom:
<PT Display Example>
Phantom:xxxx
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the Station
Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• The phantom extension numbers must be assigned by System Programming (Section
4.5.2 "Features - Phantom Extension" in the Installation Manual) before assigning the
Phantom button.
• If you assigned the Phantom button to one of the CO buttons (CO 13 through CO 24)
on a PT with 24 CO buttons, such as KX-T7230, and change the telephone to a PT with
12 CO buttons, such as KX-T7235, you must re-program the setting because CO 13
through CO 24 are not provided with the PT with 12 CO buttons. If you do not change
the setting, the phantom extension call appears on the INTERCOM (ICM type PT) or
PDN (DN type PT) button.
• More than one identical Phantom button cannot be assigned on a single extension.
Station Programming
(Assignment)
7 2
Dial 72.
CLR
(-xxxx:Phantom extension number)
CLR
phantom extension no.
Enter the phantom extension
number (3 or 4 digits).
• The STORE indicator lights.
• The display shows the initial
AUTO DIAL
STORE
Press STORE.
programming mode.
Station Programming
2-19