Panasonic KX-TD500 User Manual page 363

4.5
Conditions
• This feature is available for KX-T7230, KX-T7235, KX-T7433 and KX-T7436 only.
• The SHIFT indicator light may turn on when receiving a call. Pressing this button
provides you with more information about the caller.
• If a CO line name is assigned, you can select either the initial display, Caller ID, or CO
line name.
• You can modify the logged numbers for callback purpose. Refer to "Call Log,
Incoming" feature.
• Caller ID or Call Duration
You can specify the initial display, Caller ID or Call Duration, which is shown on the
display PT when you answer a CO call.
• Call Information Display feature is also available for KX-T7431. However, the
operation of KX-T7431 is different from that of KX-T7230, KX-T7235, KX-T7433
and KX-T7436. The KX-T7431 user can switch the display by pressing "*" while
receiving the Caller ID information.
Programming References
• Station Programming (Section 2.2)
Initial Display Selection
• System Programming — Installation Manual, Section 4
4.2.7 System - System Option
4.4.1 Line - Trunk Line
4.4.2 Line - Extension Line
4.5.11 Features - Caller ID Registration
Feature References
Call Log, Incoming (4.5/Special Display Features)
Call Log Incoming, Log Lock (4.5/Special Display Features)
* The Caller ID service provides you with a caller's information, such as his/her name and telephone
number, on the CO line assigned to receive Caller ID service calls. Refer to "Caller ID Service" in the
Features Guide for further information.
4-248
Station Features and Operation
Special Display Features
— (37) LCD Display Mode while CO talking
— Name
— Initial Display Selection
— Name
— Number