5.2
Programming References
• System Programming — Installation Manual, Section 4
4.2.7 System - System Option
Monitoring an outside line activity
You can monitor the activity of an outside line by assigning an S-CO button (See
"Single-CO (S-CO) Button Assignment" on page 5-18) and/or a G-CO button (See
"Group-CO (G-CO) Button Assignment" on page 5-11).
Conditions
• This feature is not available for the DSS Console connected to a PLC or HLC card.
• This feature is available for the DSS Console connected to a DLC or DHLC card whose
LPR version is 1 or above.
• You can confirm the "LPR Version" in Section 4.1.1.3"Card Properties
(DHLC/ESLC/DLC)" of the Installation Manual.
5-28
DSS Console Features
DSS Console Features
— (25) Pressing DSS Key Operation in CO talking