Panasonic KX-TD500 User Manual page 147

C
PT and SLT
Lift the handset
or press
SP-PHONE/MONITOR.
Confirmation Hang up or press
tone and SP-PHONE/MONITOR.
dial tone
Conditions
• Up to 16 digits (including a line access code) can be programmed.
• Class of Service
Class of Service programming determines the extensions that can perform this feature.
• Treatment of the calls to be forwarded
Toll Restriction, Automatic Route Selection (ARS) and Account Code Entry
requirements of the extension in Call Forwarding mode still applies to the call
forwarded by this feature.
• Extension-to-CO Line Call
If a call between an extension and an outside party is established by this feature, the
call duration can be restricted by the following system timer
"Extension-to-CO Line Call Duration Time (1-64 min.)"
This restriction applies to the extension whose "Time Limit of Outside Calls" setting
(Class of Service programming) is set to "Yes" by System Programming.
• CO-to-CO Line Call
If a call between two outside parties is established by this feature, the call duration is
determined by "CO-to-CO Line Call Duration Time (1-64 min.)". An alarm tone is sent
to both outside parties 15 seconds before the time-out. The call is disconnected at the
time-out.
• Trunk-to-Trunk Connection
Before utilizing this feature, "Trunk-to-Trunk Connection" should be enabled by
System Programming.
4-32
Station Features and Operation
4.3 Station Features and Operation
FWD/DND
7 1 0
For PT: Press FWD/DND.
For SLT, PT: Dial 710.
For PT
6
line access code
For SLT, PT
Dial 6.
<PT Display Example>
• When you dial "1234657":
FWD(CO) 91234567
• The FWD/DND indicator light flashes red slowly.
phone no.
Enter a line Dial the
access code phone number.
(9 or 77 or 801
through 848).
Dial #.