3.1
User Programming Instructions
Using the Overlay
A programming overlay is packed with the telephone at the factory. This overlay should
be used at all times in the programming mode since the functions of the telephone keys
change in the programming mode as follows: (The original functions are in parentheses.)
During Normal Operation
(SP-PHONE)
(AUTO ANSWER / MUTE)
(TRANSFER)
(INTERCOM)
(AUTO DIAL / STORE)
(Up/Down/JOG)
(PAUSE / PROGRAM) PAUSE / PROGRAM
(REDIAL)
(FLASH)
(FWD/DND)
(CONF)
(HOLD)
During Programming
NEXT
PREV (PREVIOUS)
SELECT
FLASH
CLEAR
– /
SECRET
STORE
END
Skip+/Skip-
User Programming
3-3