Panasonic KX-TD500 User Manual page 277

P
Unscreened Call Transfer
PT
During a conversation;
TRANSFER
Press TRANSFER.
• The other party is placed on
consultation hold.
Conditions
PT (DN) • SDN button
An SDN button can be assigned to a flexible CO button on a DN type PT by Station,
User or System Programming.
PT (DN)
• FWD/DND Override
The call originated by this feature overrides FWD/DND (Call Forwarding/Do Not
Disturb) feature assigned on the PDN owner extension.
• A call made by this feature rings the destination PDN button immediately even if
PT (DN)
delayed ringing or no ring is set on that PDN button. Refer to "PDN/SDN Button
Delayed Ringing Assignment" in Section 2.2 Station Programming.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment - Secondary Directory Number (SDN) Button
• User Programming (Section 3)
[005] Flexible CO Button Assignment
• System Programming — Installation Manual, Section 4
4.4.2 Line - Extension Line
Feature References
Button, Line Access — Primary Directory Number (PDN) (
Button, Line Access — Secondary Directory Number (SDN) (
Ringing Transfer
4-162
Station Features and Operation
4.3 Station Features and Operation
(SDN)
Confirmation tone Press an idle SDN.
and dial tone (flexible CO button)
• The SDN indicator light turns green.
— Flexible CO Key Assignment
(SDN)
Dial tone Press the
same SDN
again.
• The call is transferred.
see Features Guide)
see Features Guide)
Hang up or press
SP-PHONE/MONITOR.