Panasonic KX-TD500 User Manual page 28

1.1
Usage
AUTO ANSWER/MUTE Button
Used for hands-free answer back; or it turns the microphone off during a conversation.
AUTO DIAL/STORE Button
Used for System Speed Dialing or storing program changes.
CONF (Conference) Button
Used to establish a three-party conference.
FLASH Button
Sends an External Feature Access signal to the central office or host PBX to access their
system features. If a PBX is not being used, this button can be used to disconnect the
current call and start another call without hanging up.
Function (F1 through F10) Buttons
Used to perform the corresponding displayed function or operation.
FWD/DND (Call Forwarding/Do Not Disturb) Button
Used to program the Call Forwarding feature or set the Do Not Disturb (DND) feature.
HOLD Button
Used to place a call on hold.
INTERCOM Button
Used to make or receive extension calls.
Jog Dial
Used to adjust the volume of the handset receiver, headset, ringer and speaker. It also
adjusts the display contrast. Refer to "Initial Setting for KX-T7400 Series" in this
section.
For KX-T7431, KX-T7433 and KX-T7436 users, it is also used to select data from the
Call Directory and the System Feature Access Menu.
MESSAGE Button
Used to leave a notification to a busy extension or call back the message notification
sender.
MODE Button
Used to shift the display in order to access various features.
1-14
DPT Overview
Configuration