Chapter 2
Receiver Description and Installation
Receiver Front Panel
Smart Card Door
Behind this door is a slot for a future smart card. No smart card is included with
this receiver.
Arrow Buttons
You can use the ARROW buttons to change satellite channels displayed on your
TV. From within a menu, use these buttons to move the highlight up or down.
Indicators
•
- The green light indicates that the receiver is providing
TV1 Power
programming to your TV through the rear-panel
•
- The red light indicates that the DVR is recording an event.
Recording
Buttons
The buttons on the receiver give you some control of the receiver. However,
most of the time you will want to use the remote control that came with your
receiver.
•
- Displays the receiver's
System Info
•
- Displays the
Menu
ARROWS and SELECT buttons to navigate through the menus.
•
Arrows/Select
ARROW and
- Press the POWER button to turn satellite programming on or off
•
Power
to your TV.
IR Sensor
The INFRARED (IR) SENSOR receives IR signals from the remote control.
. After you press this button, use the
Main Menu
- Use the ARROWS and SELECT the same way as the
buttons on the remote control.
Select
output connections.
TV1
screen on your TV.
System Info
Page 19