Unlocking The Processor Locking Mechanism With The Special Processor Tool; Removing The Turbo Fan Heatsink And The Processor; Replacing A Processor - HP Integrity rx2600 Operation And Maintenance Manual

Removing and Replacing Components

Unlocking the Processor Locking Mechanism with the Special Processor Tool

1
Insert special processor tool here
2
The special processor tool rotates this lock underneath the heat sink
3
Unlocked
4
Locked
8. Remove the turbo fan heatsink and processor from the server.

Removing the Turbo Fan Heatsink and the Processor

Replacing a Processor

To replace a processor, follow these steps:
You must have a processor in socket CPU0 before installing one in socket CPU1.
1. If you are installing a second processor, power off the server, disconnect all power and
external cables and remove the server covers.
2. If you are replacing a processor, remove the old processor.
3. Ensure that the processor locking mechanism is rotated into the unlocked position.
96
1
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
2 3 4