Using The Ilo Mp Commands - HP Integrity rx2600 Operation And Maintenance Manual

System Configuration
(c) Copyright Hewlett-Packard Company 1999-2002.
All Rights Reserved.
MP Host Name: iaslhpfc
Revision E.02.11
**************************************************************
MP ACCESS IS NOT SECURE
Default MP users are currently configured and
remote access is enabled.
Modify default users passwords or delete
default users (see UC command)
OR
Disable all types of remote access (see SA command)
**************************************************************
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Create Local Session
HE: Main Help Menu
X: Exit Connection
MP Host Name: iaslhpfc
MP>
4. You can now enter individual commands.
❏
To run an individual command on servers with iLO MP firmware E.02.10, follow these
steps:
a. Enter the command at the iLO MP command prompt.
b. Press
❏
To run an individual command on servers with iLO MP firmware E.02.20 or higher,
follow these steps:
a. To access the command menu prompt, run the
b. Enter the command at the prompt.
c. To run the command, press

Using the iLO MP Commands

The following sections provide a brief overview of the available commands. For detailed
information, run the
The iLO MP Help menu displays:
==== MP Help ======================================================
Enter a command at the help prompt:
OVerview
LIst
<COMMAND>
TOPics
HElp
48
Enter
to run the command.
he
command.
MP Help System
: Launch the help overview
: Show the list of MP commands
: Enter the command name for help on individual
command
: Show all MP Help topics and commands
: Display this screen
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
CM
command.
Enter
.