Installation Sequence And Checklist; Unpacking And Inspecting The Server; Verifying Site Preparation - HP Integrity rx3600 Installation Manual

If installing an internal assembly, wear an antistatic wrist strap and use a grounding mat, such
as those included in the Electrically Conductive Field Service Grounding Kit (HP 9300- 1 155).
Handle accessory boards and components by the edges only. Do not touch any metal-edge
connectors or any electrical components on accessory boards.

Installation Sequence and Checklist

Table 2 lists the server installation steps. Follow these steps in sequence to install the server.
Table 2 Installation Sequence Checklist
Step Description
1 Unpack and inspect the server shipping container. Inventory the contents using the
packing slip.
2 Install additional components shipped with the server.
3 Install the server into a rack or pedestal mount.
4 Connect cables to the server.
a. Connect AC input power cable.
b. Connect LAN core I/O cable.
5 Set up the console.
6 Access the host console.
7 Power on the server.
8 Configure core I/O cards.
9 Boot the operating system.
10 Verify the server configuration.

Unpacking and Inspecting the Server

This section describes procedures you perform before installation. Ensure that you have adequately
prepared your environment for the new server and received all the components you ordered. Verify
that the server and its containers are in good condition after shipment.

Verifying Site Preparation

Verifying site preparation is an essential part of a successful server installation. It includes the
following tasks:
Gather LAN information. Determine the IP addresses for the iLO 2 MP LAN and the system
LAN.
Establish a method to connect to the server console. For more information on console connection
methods, see
Verify electrical requirements. Ensure that grounding specifications and power requirements
have been met.
Validate server physical space requirements.
Confirm environmental requirements.
For more information on server electrical, physical space, and environmental requirements, see
the HP Integrity rx3600 Site Preparation Guide.
10 Installing the System
"Console Setup" (page 36).
Completed