Overview
Rear Panel
The rear panel on the rx2600 and zx6000 has the following features:
■
Connectors are shaped to go in only one way to prevent improper cable attachment.
■
Ports are labeled for easy identification.
■
iLO MP ports are positioned above (rack-mount) or to the right of (pedestal) standard
connectors (optional on zx6000 workstation).
■
LAN LEDs provide additional information:
❏
Four Gigabit LAN LEDs
❏
Two System Management 10/100 LAN LEDs
❏
Four iLO MP LAN LEDs (optional on zx6000 workstation)
■
Monitor Connector on graphics card. zx6000 workstations may include graphics cards with
single or multiple monitor support.
■
Locator LED (rack-mount configuration only) identifies the rack position of the server.
2
1
14
Rear Panel Connectors
1 Power (PWR2)
2 Power (PWR1)
3 iLO MP Card: VGA, Serial, LAN, Reset
(optional on zx6000 workstation)
4 System Lock
5 Serial Console Port A
6 Serial Port B
7 Monitor Connector(s)
(zx6000 workstation only)
CAUTION: Do not connect a SCSI terminator to the SCSI connector on the back of the server; the
connector is automatically terminated. If an external SCSI device is the last device connected externally to
the server, you must connect a SCSI terminator to that device.
20
3
4
13
1 1
12
10 9
8
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
5 6
7
8 USB Ports (mouse and keyboard ports labelled)
9 TOC Button
10 Locator LED and Button
1 1 10/100 BT Management LAN with Integrated LEDs
12 10/100/1000 BT Gigabit LAN LEDs
13 10/100/1000 BT Gigabit LAN
14 LVD/SE SCSI