System Information - HP Integrity rx2600 Operation And Maintenance Manual

System Configuration
Security/Password Menu
You can set administrator and user passwords to provide different levels of access to the system
firmware:
■
The Administrator can access and change all settings in the EFI Boot Manager program and
can run the EFI shell.
■
The User can access basic functions in the EFI Boot Manager.
NOTE: These are not OS passwords. These passwords limit access to the firmware interface
only. For information on setting OS passwords, see your OS user guide.
To add, change, or delete passwords, follow these steps:
Security/Password Menu
1. Select
2. Select either:
❏ Set Administrator Options
❏ Set User Options
3. Select:
❏ Set Administrator Password
❏ Enable/disable Password
❏ Help
4. When you are finished, select
Advanced System Configuration Menu
Advanced System Configuration Menu
The
server configuration. The following examples show typical configurations, the exact information
on each server is different.
■ All x Information
This options lists all of the information from the selections below in one screen.

■ System Information

Date/Time: May 14, 2003 13:00:43 (20:03:05:14:13:00:43)
Manufacturer: hp
Product Name: workstation zx6000
Product Number: A8081A
Serial Number: TS21600014
UUID: 31619E41-2DD2-11D7-BC2F-0735A1DF6599
System Bus Frequency: 200 MHz
■ Processor Information
# of L3 L4 Family/
CPU Logical Cache Cache Model Processor
Slot CPUs Speed Size
---- ------- -------- ------ ------ ------- --- ------------
0 1
■ Cache Information
See processor information, above.
38
for assistance
Exit
Size
900 MHz 1.5 MB None 1F/00
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
.
Set User Password
or
to specify whether a password is required
.
displays a variety of information about the
(hex.) Rev State
B3 Active
to set a new password