Accessing The Logs With Ilo Mp Commands - HP Integrity rx2600 Operation And Maintenance Manual

Troubleshooting
sel
The command displays the system event log. For example:
1 2 3 4 5 6 7
00E0 - Pwr Spply 1 Ctrl Enabled 44-08:09:01 2003-02-28 16:41:46
00F0 2 CPU0 Boot start 00063 DT 06 0000000000000000
0100 2 CPU0 Boot start 00063 Time 2003-02-28 16:41:46
0110 - BMC LPC reset 00-12:70:02 2003-02-28 16:41:47
Each column in the log contains a different data field:
1. Record ID.
2. Severity for E0 messages.
3. Generator id or sensor reporting the event.
4. Text description of events.
5. Sensor number-Sensor Type:Event Type:Data1 fields for type 02 msgs (triplet) event id for E0 msgs.
6. Data2 and Data3 for type 02 msgs (if applicable) or Data type for E0 messages.
7. Timestamp or extended data specific to the event.

Accessing the Logs with iLO MP Commands

The SEL and FPL data can also be accessed from the iLO MP logs using the iLO MP card
command. Logs can be displayed in three modes: raw hex, text or keyword.
■
iLO MP firmware E.02.10: The
■
iLO MP firmware E.02.20 or higher: Output mode is selected from a menu when the log is
displayed.
Hex Mode Example:
13 0x203E5F914A0200E0 FFFF010944080300
14 0x5680006300E000F0 010000003E5F914A
14 0x5680006300E000F0 0000000000000000
15 0x203E5F914B020110 FFFF027000120300
Text Mode Example:
Log Entry 13: 28 Feb 2003 16:41:46
Alert Level 2: Informational
Keyword: Type-02 080901 526593
Power supply turned on
Logged by: BMC;
Data1: Device Enabled
0x203E5F914A0200E0 FFFF010944080300
Log Entry 14: 28 Feb 2003 16:41:46
Alert Level 2: Informational
Keyword: BOOT_START
CPU starting boot
Logged by: System Firmware
Data: Implementation dependent data field
0x5680006300E000F0 0000000000000000
132
SDM
Sensor: Power Supply - Pwr Spply 1 Ctrl
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
command determines the format of the display.
0
SL