Watch Settings; Alarm - Polar Electro RS100 User Manual

Hide thumbs Also See for RS100:

Table of Contents

Enlarged version

5.3 WATCH SETTINGS

1. In Time mode, press

. Settings is displayed.

2. Press the Red button. Timer SET is displayed.

3. Press

until Watch SET is displayed.

4. Continue by pressing the Red button and follow the steps below:

The display reads:

Press

to set

5. Alarm

Once / Mon-Fri / Daily / Off

• select Alarm mode

6. AM / PM (for 12h format)

• select AM or PM

7. Hours

• adjust the hours

8. Minutes

• adjust the minutes

• To return to the Time mode, press and hold the Stop button.

Press the Red button to accept

Red button

(Skip step 6 for 24h format)

Red button

Alarm

The Alarm functions in all modes. When the Alarm sounds, Alarm! with a ﬂ ashing backlight is displayed. The alarm will

sound for a minute unless you press the Stop button. To delay the alarm an extra 10 minutes, press the

button: Snooze is displayed. The alarm will sound again after 10 minutes. To cancel the snooze and Alarm, press the Stop

button in Snooze mode.

Alternatively, you can quick access Alarm settings in Time mode by pressing and holding the Stop button.

Note: If the battery low symbol

before the symbol appears.

ENG

appears in the display, the Alarm cannot be activated. However, the Watch Alarm will work once if it is set

or the Red

Table of Contents