Total Values; Viewing Total Values - Polar Electro RS100 User Manual

4. TOTAL VALUES

Total values include cumulative values of information recorded during your training sessions. Use the Total values fi le as a
weekly/monthly counter of your training values. The values are updated automatically, when exercise recording is stopped.
This function keeps track of your cumulative values starting from the last reset. For further information on how to reset the
values, see page 26.
Note: If there are no Total values accumulated yet, No Totals is displayed.

4.1 VIEWING TOTAL VALUES

1. In the Time mode, press the
2. Press the Red button. Tot.Time and the total time are displayed.
3. Use the or button to browse through the following information:
Total values
Press Red button
Tot.Time
/
Tot.Cal
/
Tot.Count
* If no Total values are accumulated yet, the reset date is displayed.
/
ResetAll ?
24
or button until Totals is displayed.
The date cumulation started*
Total cumulative exercise duration starting at previous reset
Total values
* If no Total values are accumulated yet, the reset date is displayed.
• To exit Total values, press the Stop button.
• To return to Time mode, press and hold the Stop button.
Note: When the Total values memory become full, the accumulation starts from the 0 again.
ENG ENG
The date cumulation started*
Total cumulative burnt kilocalories (Cal) starting at previous reset
The date cumulation started*
Total cumulative exercise count starting at previous reset
Reset all Total values.
For further information, see page 26.
25