To Fax Using One-Touch Dialing - Konica Minolta bizhub 162 Facsimile Manual

Faxing

To fax using one-touch dialing

If one-touch dial keys have already been programmed with fax numbers, the
fax number of a recipient can be specified by pressing just the corresponding
one-touch dial key.
For details on programming the one-touch dial keys, refer to "Specifying
ONE-TOUCH DIAL" on page 5-13.
1
Load the document into the automatic document feeder.
– For details on placing the document on the original glass, refer to
"To fax documents positioned on the original glass" on page 3-18.
2
Press the one-touch dial key ([01] through [27]) programmed with the
fax number that you wish to send the fax to.
Has the wrong one-touch dial key been pressed?
?
% Press the [No/C] key.
3
If necessary, change the resolution setting (p. 3-15).
4
Press the [Start] key.
The machine automatically starts
scanning the document and sending
the fax.
Do you want to stop the fax
?
transmission?
% Press the [Stop] key, and then
press the [Yes] key when the next
screen appears.
Fax kit FK-505
3
3-5