To Change/Delete A Programmed Timer Transmission - Konica Minolta bizhub 162 Facsimile Manual

Using the utility mode

To change/delete a programmed timer transmission

1
Select the
FAX REGISTRATION menu.
For details, refer to page 5-12.
2
Press the one-touch dial key ([24]
through [27]) programmed with the
timer transmission that you wish to
change or delete.
3
Press the [No/C] key.
4
Press the [*] and [)] keys to select
either
press the [Yes] key.
– If
grammed transmission time is displayed. (Continue with step 6.)
– If
and the
5
To change the transmission time,
press the [No/C] key, and then use
the 10-key pad to enter the correct
time. If you do not wish to change the
transmission time, press the [Yes]
key.
The recipient is displayed.
6
To change the recipient, press the
[No/C] key, and then by using the
one-touch dial keys or the speed dial
numbers, or by entering the fax
number using the 10-key pad, speci-
fy a different recipient.
– Change the F codes (SUB and SID) as desired.
Fax kit FK-505
PROGRAM DIAL
or DELETE, and then
EDIT
was selected, the pro-
EDIT
was selected, the program dialing settings are deleted
DELETE
SELECT REGIST.KEY
in the
screen appears again.
5
5-29