Reporting Settings - Konica Minolta bizhub 162 Facsimile Manual

Using the utility mode
5.8

Reporting settings

From the REPORTING menu, various functions are available for specifying
which reports are automatically printed.
No. REPORTING
1 ACTIVITY REPORT
2 RESERV.REPORT
3 TX RESULT RE-
PORT
4 RX RESULT RE-
PORT
The utility mode settings can also be specified from LSD (Local Setup for Di-
agnostic). For details, refer to "About Local Setup for Diagnostic (LSD)" on
page 7-11.
If optional network interface card NC-502 and scanner unit SU-502 are in-
stalled, settings can also be specified from the network tool PageScope Web
Connection. For details, refer to "What is PageScope Web Connection?" on
page 7-6.
Fax kit FK-505
Characteristic/Description
Every 60 transmissions/receptions, a report can be printed to
show the results of the transmissions/receptions. This function
can be used to set whether the report is printed automatically
when the 60th transmission/reception is reached.
• Default setting: ON.
If multiple recipients are specified for transmission, such as with
broadcast transmission and polling reception, a report can be
printed to show specified settings. This function can be used to
set whether this report is printed automatically.
• Default setting: OFF.
This function can be used to set whether the report showing the
result of a transmission is printed automatically after the transmis-
sion is finished.
• Default setting: OFF.
This function can be used to set whether the report showing the
result of a reception is printed automatically after mailbox recep-
tion is finished. (If regular reception is not finished normally, a re-
port will always be printed, regardless of the selected setting.)
• Default setting: OFF.
5
5-63