4
5
Specify the relay station, and then
press the [Yes] key. For details, refer
to "Dialing" on page 3-3.
A screen appears, allowing you to
specify the relay box ID.
6
Using the 10-key pad, enter the relay
box ID.
–
Enter the relay box ID (20 digits or
less) programmed at the relay
station.
–
The only characters that can be used in the mailbox ID are 0
through 9,
Do you want to correct the ID?
?
% Press the [No/C] key, and then enter the new number.
7
Press the [Yes] key.
A screen appears, allowing you to specify the password.
8
Using the 10-key pad, enter the
password.
–
Enter the password (20 digits or
less) if a password has been set
at the relay station.
–
The only characters that can be used in the password are 0 through
9,
Do you want to correct the password?
?
% Press the [No/C] key, and then enter the new number.
9
Press the [Start] key to begin scanning and sending the fax.
4-16
, and #.
, and #.
Fax transmission/Reception methods
Fax kit FK-505