Konica Minolta bizhub 162 Facsimile Manual page 82

4
6
Using the 10-key pad, enter the mail-
box ID of the recipient.
– Enter the mailbox ID (SUB) (20
digits or less) registered for the
recipient.
– The only characters that can be used in the mailbox ID are 0
through 9,
– If the recipient is specified using a one-touch dial key or a speed
dial number also programmed with a SUB, the SUB is displayed as
the mailbox ID. If necessary, change the mailbox ID.
Do you want to correct the mailbox ID?
?
% Press the [No/C] key, and then enter the new number.
7
Press the [Yes] key.
8
Using the 10-key pad, enter the
password.
– Enter the password (20 digits or
less) if a password has been set
for the recipient's mailbox.
– The only characters that can be used in the password are 0 through
9,
Do you want to correct the password?
?
% Press the [No/C] key, and then enter the new number.
9
Press the [Start] key to begin scanning and sending the fax.
Do you want to stop the timer transmission?
?
% Select
Note
The same ID cannot be used as the relay box ID and mailbox ID.
The recipient's machine and mailbox settings must be specified.
In order for the recipient to check fax documents, the mailbox ID is need-
ed.
4-14
, and #.
, and #.
CANCEL RESERV.
Fax transmission/Reception methods
from the FUNCTION menu (p. 4-21).
Fax kit FK-505