4
To send a fax manually
1
Load the document into the automatic document feeder.
2
If necessary, change the resolution setting (p. 3-15).
3
Pick up the telephone receiver.
Check that the dial tone can be
heard.
4
Specify the fax number of the recipi-
ent.
–
Use the telephone to dial the fax number.
–
The fax number of the recipient can also specified using the keys in
the control panel of this machine (p. 3-3).
5
After finishing talking on the phone, the recipient should press the nec-
essary key to start receiving the fax.
Once the recipient's fax machine is ready, a beep is sounded.
6
Press the [Start] key to begin scan-
ning and sending the fax.
7
Replace the telephone receiver.
Do you want to stop the transmission?
?
% Press the [Stop] key, and then press the [Yes] key in the next screen
that appears.
Note
If the [Speaker] key is pressed instead of picking up the telephone receiv-
er, the speaker can be used for manual transmission in the same way as
described above.
4-6
Fax transmission/Reception methods
Fax kit FK-505