3
To fax by entering the fax number directly using the 10-key pad
1
Press the [Fax] key to enter fax mode.
2
Load the document into the automatic document feeder.
3
If necessary, change the resolution setting (p. 3-15).
4
Using the 10-key pad, enter the fax
number of the recipient. F codes
(SUB and SID) can also be entered.
For details, refer to "Using F codes"
on page 4-28.
Have you entered the number correctly?
?
% The fax number can contain a maximum of 30 digits.
% The keys that can be used to enter the fax number are: the number
keys (0 through 9),
% If the [Redial/Pause] key is pressed while entering the fax number,
a 3-second pause is added. A pause appears as "P" in the display.
% If you wish to change the fax number, press the [No/C] key, and
then enter the correct number.
% If the machine is connected to a PBX line and the outside line ac-
cess number has been specified in the communication settings
(p. 5-62), enter "#" to dial the outside line access number automat-
ically.
5
Press the [Start] key.
The machine automatically starts scanning the document and sending
the fax
3-4
, #, space, and pause
Faxing
Fax kit FK-505