Security Features; Setting Passwords - Olivetti JET-LAB 600@ User Manual

The fax machine has security features that make it possible to prevent unauthorised persons from indiscriminately
transmitting documents, making copies or modifying settings. The security features are listed in the SECURITY menu
and include:
• PROTECTION PROGRAMME : to block access to INSTALLATION and SETUP settings.
• TRANSMISSION PROTECTION : to prevent unauthorised persons from using the machine for any type of
operation.
When this function is enabled, NOT EVEN calls to emergency numbers can be made.
• COPY PROTECTION : to block the use of the copier function.
• CREATE MAILBOX : to create a confidential mailbox for your correspondence.
• MAILBOX ACCESS PROTECTION : to prevent unauthorised persons accessing to your confidential
mailbox.
• BLACK LIST .: to prevent remote parties whose numbers have been blacklisted from communicating with
your fax machine.
Security features are activated by means of passwords (max. 4 digits) requested by the fax machine every time an
attempt is made to activate or access certain features or to modify fax machine settings. If the password is not
entered correctly, access will be denied.

SETTING PASSWORDS ...

To change a password that has already been
recorded , you must access certain functions
controlled by it. To be safe, make a note of any
passwords you set.
1.
Make sure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
29-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 9 on the numeric key pad.
9.INSTALLATION
4.
Press the START key.
TEL.LINE SETUP
5.
Press the FUNCTION key until the display shows:
SECURITY
F
ACSIMILE
100%
14:42
/1-9
/1-9

SECURITY FEATURES ...

6.
Press the START key.
PROGR. ACC.PASSW.

        
7.
Press the
feature, then press the START key to confirm;
otherwise go directly to the next point.
8.
Press the START key.
TYPE PASSWORD
_
9.
Type the password (max. 4 digits) and press the
START key to confirm it.
TX ACCESS PASSW.
10.
Other passwords can also be set for one or more
of the following security features: TX ACCESS
PASSW. (transmission protection), COPY ACC.
PASSW (copy protection), MBX ACCESS PASSW
(mailbox protection).
Repeat points 7 and 8 for each operation or press
the STOP key to exit from the procedure.
61