Table of Contents
Advertisement
To ensure that your fax machine works correctly, read also the recommendations at the beginning of this manual.
These recommendations concern replacement of accessories (colour or monochrome print heads) and periodical
cleaning of the following parts:
• print head nozzles
• print head electrical contacts
• print head pad
• optical reader
• casing
and the removal of documents jammed in the ADF and paper jammed in the ASF.
For solving minor problems, refer to the appropriate section of this chapter.
REPLACING THE PRINT HEAD ("OUT OF
INK") ...
When the ink in the cartridge runs out, the display
shows the message "OUT OF INK". At this point you
must change the print head.
When changing the print head, take care not to
move the print head carriage from the loading
position.
1.
Press the
key. The display will show:
"CHANGE PRINT HEAD: PRESS RESET".
This key is NOT active during print operations.
To move the print head carriage, you should
press it ONLY after the print operation is
completed.
Lift the print head compartment cover in the
direction indicated by the arrow.
M
AINTENANCE
2.
Release the print head, pushing the lever towards
the back of the machine.
The print head is released towards the front of the
machine. If necessary, accompany it with a finger
of the other hand.
MAINTENANCE
101
Advertisement
Table of Contents
