Table of Contents
Advertisement
Select the type of resolution as follows ...
Select the type of resolution
the following criteria:
• NORMAL, if the document is easily readable. The
upper row of the display shows "NORMAL" and
the lower shows "DOCUMENT READY».
• FINE, if the document contains small characters or
drawings. The upper row of the display shows
"FINE" and the lower shows «DOCUMENT
READY».
• EXTRA FINE, if the document contains very small
characters or drawings. The upper row of the
display shows "EXTRA FINE" and the lower shows
"DOCUMENT READY».
• PHOTO, if the document contains mainly
photographic images. The upper row of the display
shows
"PHOTO"
and
«DOCUMENT READY».
• EXTRA PHOTO, if the document contains
photographic images and you wish to obtain an
excellent reproduction. The upper row of the
display shows "EXTRA PHOTO" and the lower
shows «DOCUMENT READY».
When switched on, the fax is set automatically to
transmit text and graphic documents with optimum
definition.
To transmit clearly defined copies of photo-
graphic images, proceed as follows:
1.
Make sure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
02-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 8 on the numeric key pad.
8.SETUP
4.
Press the START key.
DATE AND TIME
5.
Press the FUNCTION key until the display shows:
VARIOUS SETTINGS
F
ACSIMILE
on the basis of
the
lower
shows
100%
15:29
/1-9
/1-9
6.
Press the START key until the display shows:
"PHOTO:AUTO". Texts and graphics are printed
clearly in this mode
PHOTO: AUTO
7.
Press the
available: «PHOTO: GREY TONES». The
photograph will be reproduced very clearly in this
mode.
PHOTO: GREY TONES
8.
Press the START key to confirm your selection
and then press the STOP key to return the fax to
its initial waiting mode.
RX ON FAX
02-10-99
TRANSMITTING A DOCUMENT ...
Procedure A:
i.e.:
1.
Make sure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
07-10-99
2.
Insert the document in the ADF. The display
shows
the
original
«NORMAL».
NORMAL
DOCUMENT READY
If the document you are about to transmit is
particularly light or dark, or if it contains very small
characters or drawings, you should change the
pre-set contrast values.
3.
Dial directly on the fax machine keypad the
number (max. 64 digits) to which you want to send
your document.
TYPE NUMBER
0125 230023
100%
15:29
100%
15:42
value
for
resolution:
100%
27
Advertisement
Table of Contents
