Tranmitting And Receiving; What Documents Can Be Inserted In The Adf; Transmitting And Receiving - Olivetti JET-LAB 600@ User Manual

Multifunction ink jet fax
Table of Contents

Advertisement

Now that your fax machine has a name and a number,
you can use it to:
• transmit documents (also in delayed mode, or
using the polling method),
• receive documents (also using the polling
method),
• make telephone calls (see the "Using the fax
machine as a telephone" ).
From now on to simplify the procedure described, the
following graphic representations will be used at the
beginning of each procedure:
Press this key once
Press this key X times
X
Insert the document with the
transmitting or copying side
face down.
Lift the receiver.
Replace the receiver.
Dial on the numeric keypad.
Press a numeric key for more
than one second (one-touch dial
key).
Incoming call
F
ACSIMILE
Press
the
SPEED
DIAL key and enter a
speed dialling code.

TRANSMITTING AND RECEIVING

WHAT DOCUMENTS CAN BE INSERTED IN
THE ADF...
Dimensions
• Width min. 148 mm - max. 216 mm
• Length min. 216 mm - max. 600 mm
Thickness
From:
60 - 90 g/m
2
(max. 25 sheets)
2
50 - 340 g/m
(1 sheet at a time)
For originals differing from specified formats, use the
appropriate document holder.
Recommendations
In order to avoid damaging your fax machine and/or
invalidating the guarantee, make sure that the
documents you use do not contain:
• staples
• paper clips
• adhesive tape
• correction fluid or wet glue.
NEVER USE ORIGINALS THAT ARE ...
too thin
curled
torn
damp
too small
crumpled
carbon paper.
In all these cases, you must either photocopy the
document and then transmit the copy, or use the
appropriate document holder.
wet or
25

Advertisement

Table of Contents
loading

Table of Contents