Transmitting And Receiving In Confidential Mode - Olivetti JET-LAB 600@ User Manual

TRANSMITTING AND
CONFIDENTIAL MODE ...
Transmitting ...
Confidential transmission is only possible if one-touch
keys and speed dialling codes have been
programmed for this type of transmission (addition of
MBOX ID. and MBX ACC.C.); see " Programming
one-touch keys and speed dialling codes... " in
" Transmitting and receiving... ".
Receiving ...
To receive documents in confidential mode , you
must already have created a confidential mailbox on
your fax machine .
Creating a confidential mailbox ...
Confidential mailboxes can be created as follows:
1.
Make sure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
29-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 9 on the numeric key pad.
9.INSTALLATION
4.
Press the START key.
TEL.LINE SETUP
5.
Press the FUNCTION key until the display shows:
SECURITY
6.
Press the START key.
PROGR. ACC.PASSW
F
ACSIMILE
RECEIVING IN
100%
14:42
/1-9
/1-9

            
7.
Press the
CREATE MAILBOX
8.
Press the START key.
TYPE MBOX ID.
_
9.
Type the identification code for the mailbox and
press the START key to confirm the setting.
TYPE ACCESS CODE
_
10.
If you wish to have further protection, type in an
access code.
Press the START key to confirm the settings, then
the STOP key to exit this procedure.


In RX ON PC mode, the CONFIDENTIAL
MAILBOX feature is not available. Any documents
addressed to the mailbox are sent directly to the
PC.
63