Table of Contents
Advertisement
Digital Video Recorder
Motion Detector
Figure 37 — Motion Detector setup screen.
Your DVR has built-in video motion detector. Video motion detector can be turned On or Off
for each camera.
Highlighting the box under the Sensitivity heading allows you to adjust the DVR's sensitivity
to motion. There are five settings with 1 being the least sensitive and 5 being the most sensitive.
You can adjust the minimum number of detection blocks that must be activated to trigger a
motion alarm. Highlight a box under the Min Size heading and adjust the number. The smaller
the number, fewer detection blocks must be activated and therefore more sensitive.
Turning the View setting On will allow you to observe how the DVR is reacting to motion.
When in the motion viewing mode, the detection zone of video will be displayed in green. Any
detected motion within the zone will be displayed in red.
You can define the area of the image where you want to detect motion; e.g., a doorway.
Highlight the icon under the Zone heading, and press the
button. The Motion Detection
Zone screen will display.
31
Advertisement
Table of Contents
