Table of Contents
Advertisement
User' s Manual
Connecting the Power Cord
Figure 16 — Power cord connector.
Connect the DC power cord of the adaptor to the DVR, and connect the AC power cord to the
adaptor and then to the wall outlet.
NOTE: The power cord connector locks into position to prevent accidental power loss.
Be sure to slide the release away from the socket before removing the plug.
WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING
HAZARD. MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR
ABRADED BY FURNITURE. DO NOT INSTALL POWER CORDS UNDER RUGS
OR CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR POWER OUTLET DOES
NOT HAVE A GROUNDING PIN RECEPTACLE, DO NOT MODIFY THE PLUG.
DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES IN TO
ONE CIRCUIT.
Your DVR is now ready to operate. Refer to Chapter 3 — Configuration and Chapter 4 —
Operation.
10
Advertisement
Table of Contents
