Active Cameo Mode; Pip Mode - Samsung SHR-3091 User Manual

User' s Manual
Pressing the
SEQUENCE/WIDE
monitor. When in one of the multi-view formats, pressing this button will cause the DVR to
through user-defined screen layouts (page sequence), or the bottom, right screen to display live
cameras sequentially (cameo sequence). Selecting another display mode, or pressing the
SEQUENCE/WIDE
formats, pressing the Left or Right arrow buttons will cause the DVR to go to the previous or
the next page. For example, if you press the Right arrow button in 4x4 format, the DVR
changes the page like that.
For the sequence display on the spot monitor, press the
SEQUENCE/WIDE
Pressing the FREEZE/FAR
button again.

Active Cameo Mode

You can enter the Active Cameo mode by pressing the
gray-highlight box at the bottom of video indicates the active cameo, and pressing the arrow
buttons moves the active cameo. Pressing the
the Active Cameo mode. The active cameo mode will remain in effect for 15 seconds if there is
no further action.
In active cameo mode, press the camera button you want to show that video at active cameo.
After setting the camera number at active cameo, the DVR moves the active cameo to the next
cameo. You can change the screen layout using this process.
The active cameo also can be used to select the camera to control Pan, Tilt and Zoom
capabilities.

PIP Mode

You can display a Picture-in-Picture by pressing the
location of the PIP by pressing the Up and Down arrow buttons and its size by pressing the Left
and Right arrow buttons.
68
button will cause the cameras to display sequentially on the
button again will exit the Sequence mode. When in one of the multi-view
button.
button will freeze the current image on the screen until you press the
SPOT/PRESET
button in any multi-view format. The
button while in the Active Cameo mode exits
button. You can change the
MODE/TELE
button and then